SF3015NP & SF6016T Laser Cutting Machines Installation and Training in Peru
SENFENG has successfully completed the installation and training of two advanced systems—the SF3015NP sheet metal fiber laser cutter and the SF6016T tube laser cutting machine—in Peru. The project was carried out by after-sales engineer Mr. Zhao, covering equipment setup, system integration, parameter optimization, and comprehensive operator training. Both machines were smoothly brought into operation, ready to support diverse metal processing tasks.
Site Preparation and Equipment Positioning
Upon arrival, the site foundation had already been completed, providing a solid base for installation. The SF3015NP machine was initially prepared for setup, and its placement was later adjusted to better suit the production layout.
During inspection, minor sheet metal damage was identified and promptly resolved, ensuring the equipment maintained its optimal condition. The following day, installation continued alongside coordination of machine positioning and accessory layout, while preparations for power supply were carried out on-site.
Tube Machine Installation and Electrical Setup
Installation of the SF6016T tube laser cutting machine began, including fiber routing and display system setup. Electrical wiring and cable connections were then completed to prepare both machines for operation.
During this stage, the power supply configuration was carefully evaluated. Through coordination, the system was adjusted to provide stable 380V output, ensuring compatibility with all equipment.
Power Integration and System Preparation
The focus shifted to power system optimization and auxiliary equipment integration. Electrical wiring, air pipelines, and water circuits were extended and connected to meet operational requirements.
The air compressor system was successfully configured and tested, confirming stable voltage and reliable performance. Additional components and connectors were installed to complete the system infrastructure.
Final Assembly and Commissioning
Final system checks were conducted, including water chiller filling, air circuit verification, and overall inspection. With all systems confirmed to be functioning correctly, the machines entered the commissioning phase.
Parameter Optimization and Initial Cutting Tests
Machine parameters were configured, and initial cutting tests were carried out on sheet materials. Multiple thicknesses of carbon steel (1–6 mm) were tested using air cutting, with parameters optimized for stable performance.
Additional demonstrations included marking processes and basic drawing operations to support production applications. Operator training also began, covering machine operation, air compressor usage, and routine maintenance.
Tube Cutting Calibration and Process Adjustment
Further adjustments were made to resolve gas flow alarms on the tube cutting system. After parameter refinement, stable cutting of 2 mm square and round tubes was achieved.
Electrical Optimization and Stable Operation
During operation, power system optimization was carried out to enhance overall stability. After systematic adjustments, the machines achieved consistent and reliable performance. Cutting tests were then resumed successfully.
Advanced Cutting and Comprehensive Training
Final commissioning included cutting trials on thicker materials, such as 20 mm carbon steel, as well as aluminum sheets and various tube specifications.
Operators received in-depth training on machine operation, programming basics, and advanced functions such as flying cutting. All operational questions were addressed to ensure full understanding.
Final Optimization and Project Completion
Additional parameter tuning was performed for 3 mm tube cutting, and any remaining operational questions were clarified during follow-up training.
With all systems running smoothly and operators fully trained, the project was successfully completed and formally accepted.
This project demonstrates SENFENG’s ability to deliver complete solutions—from installation to training—ensuring that both sheet and tube laser cutting systems achieve reliable performance and seamless integration into production environments.
FAQ
What training is included with a laser cutting machine purchase for overseas customers?
SENFENG provides comprehensive onsite operator training covering daily operation, programming basics, and routine maintenance. During the Peru project, engineers guided the team through sheet metal cutting tests on 1–6 mm carbon steel, tube laser processing on square and round profiles, and advanced features like flying cutting, ensuring the local staff could independently run both the SF3015NP and SF6016T after project handover.
Can the tube laser cutter handle round and square profiles?
Yes. During the Peru installation, the SF6016T tube laser cutting machine was calibrated to process 2 mm square tubes and round tubes with stable results. After resolving gas flow adjustments and fine-tuning parameters, the system demonstrated reliable performance across multiple tube specifications, making it suitable for diverse metal fabrication applications right after setup.
