SF3015NP 6kW Fiber Laser Cutter Installation & Training in Algeria

SENFENG has successfully completed the installation and operator training of an SF3015NP 6kW fiber laser sheet cutting machine in Algeria. The project was carried out by after-sales engineer Mr. Liu Wei, who provided comprehensive on-site support, including mechanical assembly, system setup, parameter configuration, and user training. Through a structured and efficient process, the machine was smoothly put into operation and fully prepared for production use.

Arrival and Initial Installation

Upon arrival at the site, the engineer immediately began the installation process. Key mechanical components, including the machine beam and sheet metal covers, were assembled with precision.
At the same time, critical system components such as the fiber cable and water chiller were installed to ensure proper optical transmission and stable temperature control. The installation was carried out efficiently, laying a solid foundation for subsequent system integration and commissioning.

Electrical Connection and Parameter Configuration

The next phase focused on electrical setup and process parameter adjustment. The engineer completed the main power connections and initiated system checks.
Cutting parameters for oxygen and compressed air were carefully configured and optimized to ensure stable cutting performance across different materials and thicknesses.
During inspection, it was observed that the voltage between the neutral line and ground line was higher than typical reference values. Professional recommendations were provided to optimize the electrical setup, ensuring long-term stability and safe machine operation.

Final Acceptance and Operator Training

With installation and debugging completed, the project entered the final stage—machine acceptance and operator training.
The engineer conducted comprehensive training sessions covering machine operation, software usage, and daily maintenance. Operators were guided through key functions, including interface navigation, parameter setting, and standard cutting procedures.
Following successful training and verification, the machine passed acceptance smoothly and is now fully ready for production.

Conclusion

This project highlights SENFENG’s commitment to delivering efficient installation services and professional technical support worldwide. From mechanical assembly to final training, every step was executed with precision, ensuring that the SF3015NP 6kW fiber laser cutting machine is fully optimized for stable and efficient operation.

FAQ