Jinan SENFENG Technology CO.,LTD.

Maintenance and Common Problem Solutions of CO2 Laser Cutting Machine

Return list Author:CrystalReffer:www.senfenglaser.com
Maintenance and Common Problem Solutions of CO2 Laser Cutting Machine
Click number:- Release time:2018-10-30

The daily maintenance of the CO2 laser cutting machine is to ensure that the mechanical equipment is always in a good technical state, reduce the mechanical operation and maintenance costs, to ensure the safe production. I will introduce the daily maintenance of the  CO2 laser cutting machine.
Machine tool:
1.Keep the laser cutting machine clean and tidy, and remove stains in time.
2.There is no foreign matters on the front and back cover of the bed to avoid scratching the workbench.
3.Remove debris from the bed rails to avoid damaging to the rails.
4.Regularly clean the air outlet to ensure that the ventilation pipe is unblocked and the working effect is good.
5.Check each joint regularly to prevent loose screws.

CO2-laser-cutting-machine

Cleaning of the laser tube:
1.Protect the output window of laser tube, avoid the surface of output window polluted by smoke. Use cloth and alcohol to gently wipe the outer surface of the output port.
2.Clean the dust and oil of the laser tube to avoid dust accumulation near the high voltage electrode and cause high voltage ignition.

laser tube


  Lens cleaning:

1.It is recommended to clean before work every day to remove the contaminants from the lens.Do not to cause further pollution and damage to the lens.
2.The cleaning steps are as follows:
Swirl the focusing mirror from the frame and blow off the floating surface of the lens with an air ball, especially the lens with tiny particles and flocs on the surface. Fold the wiping paper and wet it with professional cleaning solution or alcohol. Gently wipe the surface of the lens with a damp wipe and repeat it several times until the mirror is clean. Once the lens paper is dirty, it must be replaced. Cleaning should be done once to avoid scratches.
If you want to know more solutions about the CO2 laser cutting machine,just call us.
E-mail:info@sfcnclaser.com
Skype:senfenglaser1
Phone:0086 13210546543

Contact SENFENG

Call:+86(531)88737920

Skype:senfenglaser1

WhatsApp:0086-13210546543

Location:No.6333 North Lingang Road, Yaoqiang Street Office, High-tech Industrial Development Zone, Ji'nan, Shandong, China